PRODUCT DATA	ALUMINUM COATING
	LN-22 CLIPPERSHIP ALUMINUM FIBRE COATING

PRODUCT DESCRIPTION:	Clippership Aluminum Fibre Coating meets ASTM-D-2824-85 Type III specifications and is 100% ASBESTOS-FREE. This is a asphalt cutback blended with aluminum paste, fibres, and additives.
BASIC USES:	Clippership Aluminum Fibre Coating is used as a protective coating offering a reflective aluminum surface for many applications.
LIMITATIONS:	DO NOT HEAT container. DO NOT thin or exceed 900 rpm when mixing or applying or use a roller for application. DO NOT apply over soft asphalt or coal tar surfaces or areas that hold ponded water. DO NOT back-brush or disturb product after leafing process has begun or surface may brown.
APPLICATION:	Clippership Aluminum Fibre Coating must be applied to a surface dry and clean of all foreign matter. This material should be applied when the temperature is 50° F or rising for best results. This material must be stirred before use and may be applied by brush or spray equipment (recommend airless or piston pump). The coverage rate should be 75-100 square feet per gallon.
STORAGE:	Clippership Aluminum Fibre Coating can be used year round and the only protection would be from weathering on the container.
COMPOSITION:	Asphalt Mineral Spirits Aluminum Paste Desiccant Fibre Diatomite	CAS 8052-42-4 CAS 64741-41-9 CAS 7429-90-5 CAS 63231-67-4 CAS 9004-34-6 CAS 61790-53-2
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.
3601 FAIRFIELD ROAD BALTIMORE, MARYLAND 21226 (410) 355-0330 (800) 536-0332 FACSIMILE (410) 355-5864 Email: sales@seaboardasphalt.com