PRODUCT DATA	ALUMINUM COATING
	LN-24 SEABOARD ALUMINUM MOBILE HOME COATING

PRODUCT DESCRIPTION:	Seaboard Mobile Home Coating is an asphalt cutback blended with fibre and aluminum paste to formulate a protective coating.
BASIC USES:	Seaboard Mobile Home Coating is designed for mobile homes as a protective coating against the rays of the sun and for weather-proofing.
LIMITATIONS:	DO NOT HEAT container. DO NOT thin or exceed 900 rpm when mixing or applying or use a roller for application. DO NOT apply over soft asphalt or coal tar surfaces or areas that hold ponded water. DO NOT back-brush or disturb product after leafing process has begun or surface may brown.
APPLICATION:	Seaboard Mobile Home Coating must be applied to a surface that is dry and clean of all foreign matter. This material should be applied when the temperature is 50° F and rising. This material can be applied by brush or spray equipment (recommend airless or piston pump). The coverage rate should be 40-60 square feet per gallon.
STORAGE:	Seaboard Mobile Home Coating can be used year round and the only protection would be from weathering on the container.
COMPOSITION:	Asphalt Mineral Spirits Aluminum Paste Desiccant Fibre Mineral Stabilizer	CAS 8052-42-4 CAS 64741-41-9 CAS 7429-90-5 CAS 63231-67-4 CAS 9004-34-6 CAS 14807-96-6
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.
3601 FAIRFIELD ROAD BALTIMORE, MARYLAND 21226 (410) 355-0330 (800) 536-0332 FACSIMILE (410) 355-5864 Email: sales@seaboardasphalt.com